Tascam UH-7000 USB Interface and Standalone Mic Preamp

SKU
TAS_UH-7000
Discontinued

$0.00 Tax Outside NY and NJ 

Product Features

  • 5.25" Kevlar Woofer
  • 1" Silk Dome Tweeter
  • 40W LF, 30W HF Output Power
  • 60 to 22,000 Hz Frequency Response
  • Rear Panel Volume Control
  • Magnetically Shielded Enclosure
  • RF Interference Protection Circuit
  • Output Protection Circuit
  • Heat Protection Circuit

Click Here to request quote for bulk quantity

+1 (888) 606-6268

The Tascam UH-7000 is a pro-level USB interface for Mac and Windows that can also be used as a standalone mic preamp. It features built-in DSP mixer effects, supports 24-bit/192kHz USB transmission and AD/DA conversion, and is housed in a rugged metal casing for durability. 

The UH-7000 is equipped with two HDIA (High Definition Instrumentation Architecture) microphone preamps that are designed to perform at −128dBu EIN, a 117dB signal-to-noise ratio and distortion ratio of 0.0009% or less. The Burr-Brown PCM4220 AD and PCM1795 DA converters allow for high-quality conversion, ensuring optimal sound reproduction for recording and monitoring.

Features:

  • Two 20-segment LED level meters
  • Standard TRS headphones output jack - 45mW/channel output
  • +48 Phantom power supply
  • Two pairs of balanced analog XLR jacks for both input and output
  • Professional output specifications (maximum output level: +24 dBu)
  • Two balanced analog TRS input jacks
  • XLR digital input and output jacks support AES3-2003/IEC60958-4 (AES/EBU) and IEC60958-3 (S/PDIF) formats
  • Three-pronged inlet power cable
  • Half-rack size
  • Confirmed operation with major DAW software, including Sonar X3, ProTools, Cubase and Live
  • RoHS CompliantThin film metal resistors with outstanding noise performance
  • Thin film metal resistors with outstanding noise performance
  • High audio quality film capacitors with low distortion
  • Low latency monitoring through the DSP mixer
  • DSP mixer can be switched between multitrack and stereo mix modes
  • DSP mixer enables independent adjustment of recording and monitoring levels
  • Line or digital outputs can be selected using the DSP mixer
  • DSP dynamics effect can be applied to inputs, outputs or the master (compressor, noise suppressor, de-esser, exciter, EQ, limiter/low cut)
  • DSP REVERB (hall, room, live, studio, plate) send effect is perfect for monitoring when recording
  • Link line function enables volume control of powered monitors
  • Single punch MIXER PANEL button
  • Strong, durable aluminum body
  • Large INPUT level knobs enable precise adjustment of input levels

 

More Information
Stock Status Discontinued
Manufacturer Tascam
Mfr Part No UH-7000
Upc Number 043774030170
Condition New
Refundable / Cancelable? Yes
Specification

Sampling Frequencies

44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

Bit Depth

24-bit

Line Input

Connector: 1/4" (6.3 mm) TRS jack, (T:hot, R:cold, S:ground), balanced 
Input Impedance: 15 kohms
Maximum Input Level: +26.5dBu
Minimum Input Level: -38dBu

Mic Input

Connector: XLR-3-31, (1:ground, 2:hot, 3:cold), balanced
Input Impedance: 2.2 kohms
Maximum Input Level: +2 dBu
Minimum Input Level: -60 dBu

Line Output

Connector: XLR-3-32, (1:ground, 2:hot, 3:cold), balanced 
Output Impedance: 100 ohms
Maximum Output Level: +24 dBu

AES/EBU Audio Input

Connector: XLR-3-31, (1:ground, 2:hot, 3:cold)
Formats: IEC60958-3 (S/PDIF), IEC60958-4 (AES/EBU)
Sampling Frequencies: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

AES/EBU Audio Output

Connector: XLR-3-32, (1:ground, 2:hot, 3:cold)
Formats: IEC60958-3 (S/PDIF), IEC60958-4 (AES/EBU)
Sampling Frequencies: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

Phones

Connector: 1/4" (6.3 mm) stereo phone jack
Maximum Output: 45 mW + 45 mW or more (THD+N 1% or less, 32 ohms loaded)

USB

Connector: USB B type 4-pin
Format: USB 2.0 high speed (480 Mbps), full speed (12 Mbps)

Power

AC 100 - 240 V, 50 / 60 Hz

Power Consumption

15 W

Audio Performance

ADC Chipset Dynamic Range: 123dB (A-weighted) 
DAC Chipset Dynamic Range: 123dB (A-weighted)
Frequency Response: 20Hz to 80kHz +0.005dB/-0.16dB (mic preamp for all sampling frequencies)
THD: 0.0009% or less(MIC to AD)
S/N Ratio: 117dB (MIC to AD)
EIN: -128dBu

Windows Requirements

Compatible OS: 

Windows XP: 32-bit SP3 or later

Windows 7: 32/64-bit SP1 or more

Windows 8: 32/64-bit

Windows 8.1: 32/6-4bit

*Windows Vista and Windows XP 64-bit are not supported.

 

Compatible Computers: 

Windows-compatible computer with a USB 2.0 port

 

CPU Type/Speed:

Dual core/2 GHz or faster (x86)

 

Memory:

2 GB or more

 

Supported Audio Drivers:

ASIO2.0, WDM (MME)

 

Mac Requirements

Compatible OS:

Mac OS X Snow Leopard (10.6)

OS X Lion (10.7)

OS X Mountain Lion (10.8)

OS X Mavericks (10.9)

 

Compatible Computers:

Apple Macintosh computer with a USB 2.0 port

 

CPU Type/Speed:

Dual core/2 GHz or faster

 

Memory:

2 GB or more

 

Supported Audio Drivers :

Core Audio

 

Dimensions

8.4 ×3.2 ×9.2" (214.0 × 81.2 × 233.0 mm)

Weight

4.85 lb (2.20 kg)

 

Packaging Info

Package Weight

7.45 lb

Box Dimensions (LxWxH)

15.7 x 13.5 x 6.6"

 

Write Your Own Review
You're reviewing:Tascam UH-7000 USB Interface and Standalone Mic Preamp
Your Rating