Tascam ML-16D Analog/Dante Converter

SKU
TAS_ML-16D
Special Price $1,299.99 Regular Price $1,599.99
No Longer Available

$0.00 Tax Outside NJ

¬ü  Dante focused interface for connection of external audio into or out of a Dante audio network
¬ü  16 channel analog line input and 16 analog line outputs (48kHz/96kHz) using 4 D-Sub connectors
¬ü  Dual redundant Ethernet jacks which support both primary and secondary connections
¬ü  Up to 24 bit/96kHz quality
¬ü  LED display for signal level and overload per input/output channel
¬ü  Reference level dip switches for selectable DBu level metering
¬ü  Firmware updatable via Dante port
¬ü  AES67 and Revenna compatible

+1 (888) 606-6268

For consultancy, customized solutions and special pricing Click Here

The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors.

A poweful and flexible solution, the TASCAM ML-316D has 2 D-Sub intputs and 2 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.

More Information
Stock StatusNo Longer Available
ManufacturerTascam
Mfr Part NoML-16D
Upc Number043774033430
ConditionNew
Return AllowedYes
Specification

Formats

44.1/48 kHz, 16/24 bit

88.2/96 kHz, 16/24 bit

Input/output ratings

PRIMARY/SECONDARY connectors

Connector: RJ-45

Transmission protocol: Dante

Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)

Cables: category 5e or faster STP cables

ANALOG OUTPUT connectors

Connector: D-sub 25-pin

Locking screws: No. 4-40 UNC (inch type)

Nominal output levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)

Maximum output levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)

Output impedance: 200 Ω or lower

Applicable load impedance: 2 kΩ or higher

ANALOG INPUT connectors

Connector: D-sub 25-pin

Locking screws: No. 4-40 UNC (inch type)

Nominal input levels: +4 dBu, +6 dBu (only when maximum input level is +15 dBu)

Maximum input levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)

Input impedance: 10 kΩ or higher

 * 0 dBu=0.775 Vrms   

Audio performance

ANALOG IN to DANTE OUT

Frequency response: +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA), +0.1 dB/-0.5 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)

Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)

S/N ratio: 113 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)

Crosstalk: 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)

DANTE IN to ANALOG OUT

Frequency response: +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA), +0.1 dB/-1.0 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)

Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)

S/N ratio: 110 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)

Crosstalk: 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)

Other

Power: AC100-240 V, 50/60 Hz

Power consumption: 22W

Dimensions: 483 × 45 × 303.8 mm (width x height x depth)

Weight: 3.5 kg

Operating temperature range: 0–40º

Included items: Main unit x1, Power cord x1, Rackmount screw kit x1, Owner’s Manual (this document) including warranty x1

Dimensions21.75 x 17 x 5.7
Write Your Own Review
You're reviewing:Tascam ML-16D Analog/Dante Converter
Your Rating