Harris(Imaging Communication) VAM6800+A4D Digital-to-Analog Monitoring Encoder/Converter

SKU
HAR_VAM6800+A4D
$2,357.19
In Stock
Only 2 left

$0.00 Tax Outside NJ

This is a clearance item. Ships in 2-4 weeks.

No return, no cancellation

  • One SD-SDI input; SMPTE 259M-C 270 Mb/s
  • Data I/O (external sync for video and audio)
  • Four composite analog video outputs (NTSC, PAL-B, or PAL-M formats)
  • SD-SDI re-clocked output; SMPTE 259M-C 270 Mb/s
  • Two stereo pairs (four mono channels)
  • Jumper-selectable audio level (0 dBFS) for each channel
  • Support for up to 24-bit audio de-embedding Q-SEE-compliant
+1 (888) 606-6268

For consultancy, customized solutions and special pricing Click Here

The VAM6800+A4D module is a digital-to-analog encoder/converter for video and audio monitoring. Part of the 6800+™ core processing platform, the module accepts one SD-SDI input with embedded audio and converts into a composite analog output (NTSC, PAL-B, or PAL-M) and 4 analog audio outputs. Video and audio processing capabilities exist via integrated video and audio processors. The VAM6800+A4D module can be controlled manually via card-edge controls, or controlled and monitored via the CCS Navigator™ software applications, HTTP web browser, or third-party SNMP-based control applications. The module is Q-SEE™-compliant, allowing for direct thumbnail monitoring when installed in an Ethernet-equipped 6800+ frame.

More Information
Stock StatusIn Stock
ManufacturerHarris
Mfr Part NoVAM6800+A4D
Specification
  • Connector : BNC per IEC 169-8
  • Differential Gain : <1.5 %
  • Differential Phase : <1.2 º
  • Equalization : Automatic up to: >23 dB, 259M-C type
  • Frequency Response : <±0.25 dB to 5 MHz
  • Impedance : 75 ohms
  • Maximum Output Level : 0 dBFS = +28 dBu (66 ohms), 0 dBFS = +22 dBm (600 ohms)
  • Output Impedance : Jumper-selectable: 66 ohms or 600 ohms
  • Type : Electronic, balanced
  • DC Offset : <±50 mV
  • DC Offset : 0 V ±0.5 V
  • Linearity : <±1.0 dB up to –100 dBFS, typical
  • Return Loss : >18 dB to clock frequency
  • Standards : NTSC, PAL-B, PAL-M
  • Standard : SMPTE 259M-C, 270 Mb/s, 525/625 component
  • Signal Level : 800 mV ±10%
  • CMRR : 30 V pk-pk up to 60 Hz
  • Signal to Noise : >54 dB RMS to 5 MHz
  • THD+N : >90 dB @ 1 kHz, -1 dBFS = +23 dBu (66 ohms) or –1 dBFS = +17 dBm (600 ohms), typical
  • Number : 4 mono channels (2 stereo pairs)
  • SNR : >100 dB @ -60 dBFS
  • Chroma/Luma Delay : <1.5 ns
  • Chroma/Luma Gain : ±1.5 %
  • Analog Audio Output :
  • Cross Talk : >95 dB, 20 Hz to 20 kHz, typical
  • Serial Digital Input Video :
  • Data I/O Input :
  • Input Impedance (jumper selectable) : 75 ohms
  • Input Sensivitity : 500 mVpk-pk
  • Cable Length (with up to four receiver cards) : 328 ft (100 m)
  • Return Loss (up to 6 MHz) : >20 dB
  • Serial Digital Output Video :
  • Rise and Fall Times : 0.75 to 1.5 ns
  • Composite Analog Output Video :
  • Output Quantizing : 10 bits
  • Adjustable Vertical Blanking : 10 to 23 lines for NTSC for both fields (Field 2: 272 to 285), 6 to 23 lines for PAL for both fields (Field 2: 318 to 335)
  • Output Level Setting Range : +16 to +28 dBu in 2 dB steps (66 ohms) , +10 dBm t
Dimensions10.63x3.15x0.4
Write Your Own Review
You're reviewing:Harris(Imaging Communication) VAM6800+A4D Digital-to-Analog Monitoring Encoder/Converter
Your Rating