Gefen EXT-DVIKA-HBT2 DVI KVM HDBaseT 2.0 Extender with USB RS-232 2-way IR 2-way Audio and POH

Special Price $617.89 Regular Price $799.00
Special Order

$0.00 Tax Outside NJ

+1 (888) 606-6268

For consultancy, customized solutions and special pricing Click Here

The EXT-DVIKA-HBT2 uses Gefen's implementation of the latest HDBaseT 2.0 technology to extend DVI over a single CAT-5e cable, up to 495 feet (150 meters). The new HDBaseT 2.0 Colligo platform provides additional features such as USB and 2-way audio extension, and ensures an even more robust and resilient connection than the industry standard HDBaseT. Resolutions up to 1080p and 1920 x 1200 (WUXGA) are supported. HDMI resolutions up to 4K DCI-Cinema(4096 x 2160 @ 30 Hz 4:4:4) and 4K Ultra HD (3840 x 2160 @ 60 Hz 4:2:0) along with 7.1 channels of LPCM and HBR (High Bit Rate) lossless digital audio are also supported when using Gefen DVI to HDMI cables. Supported HBR formats include Dolby Atmosr, Dolbyr TrueHD, DTS:X, and DTS-HD Master Audio. USB, RS-232, and 2-way L/R analog audio can be extended between the Sender and the Receiver to accommodate a complete workstation including keyboard, mouse, select USB periperals, microphone, headphones, and powered speakers. POH (Power Over HDBaseT) technology provides power from the Receiver to the Sender unit, using the same CAT-5 cable that extends the DVI, audio, and control signals. Only the Receiver unit needs an external power supply. The POH standard ensures compatibility with other POH class-compliant devices. The Gefen Syner-G software with its powerful EDID Management capabilities speeds up configuration, performs real-time performance analysis via Link Monitoring, and simplifies in-field firmware updates. 1U tall, half-rack-width enclosures can be surface-mounted, installed in a standard 19-inch rack using the EXT-RACK-1U-GRY rack tray, or be placed on a shelf.

Installation Tip: Shielded (STP) CAT-5e or better cable is recommended. Unshielded (UTP) CAT-5e or better cable may be acceptable depending on cable quality, but results could vary. Care should always be taken to keep the link cable away from power lines and other sources of electromagnetic interference.

More Information
Stock StatusSpecial Order
  • Specifications

    • Maximum Pixel Clock: 300 MHz
    • Video Input connector (Sender): (1) DVI 29-pin, female, digital only V
    • ideo Output connector (Receiver): (1) DVI 29-pin, female, digital only
    • Link connector (Sender/Receiver): (1) RJ-45, shielded, female
    • USB Host Interface port (Sender): (1) USB Type B, female
    • USB Device ports (Receiver): (4) USB Type A, female
    • USB port for Gefen Syner-G interface (Sender/Receiver): (1) Mini-B
    • RS-232 port (Sender): (1) DB-9, female
    • RS-232 port (Receiver): (1) DB-9, male
    • Analog L/R Line Audio Input connector (Sender): (1) 3.5mm mini-stereo jack
    • Analog L/R Mic/Line Audio Input connector (Receiver): (1) 3.5mm mini-stereo jack
    • Analog L/R Audio Output connector (Sender/Receiver): (1) 3.5mm mini-stereo jack
    • Mic/Line selector switch (Receiver): (1) slide type
    • Power/Video/Link Indicator LEDs (Sender/Receiver): (1) Blue, (1) Amber, (1) Green
    • Power Supply connector (Sender/Receiver): (1) 48V DC, locking
    • Power Consumption (Sender and Receiver combined): 13W
    • Operating Temperature: +32 to +122 ÔøΩF (0 to +50 ÔøΩC)
    • Operating Humidity: 5% to 90% RH, non-condensing
    • Storage Temperature: -4 to +185 ÔøΩF (-20 to +85 ÔøΩC)
    • Storage Humidity: 0% to 95% RH, non-condensing
    • MTBF: 50000 hours
    • Dimensions (W x H x D, Sender/Receiver, not including connectors and feet): 8.4" x 1.7" x 4.3" (214mm x 43mm x 110mm)
    • Net Weight (Sender/Receiver): 1.1 lbs (0.47 kg) each
    • Shipping Weight: 5.5 lbs. (2.5 kg)
  • Write Your Own Review
    You're reviewing:Gefen EXT-DVIKA-HBT2 DVI KVM HDBaseT 2.0 Extender with USB RS-232 2-way IR 2-way Audio and POH
    Your Rating