For.A UFM-18VDA 1x8 Analog Video Distribution Amplifier

SKU
FOR_UFM-18VDA
Out of stock

$0.00 Tax Outside NJ

+1 (888) 606-6268

For consultancy, customized solutions and special pricing Click Here

The UFM-18VDA 1x8 Analog Video Distribution Amplifier from For.A is a module-style digital video distribution amplifier designed for installation in a UFM frame. It includes (1) analog composite video input and (8) analog composite video outputs.

It features an input signal relay bypass function. Internal settings can be used to set loop-through for video input. Gain can also be controlled from the front piece of the module.

Analog Composite Video Distribution
Use this unit to distribute analog composite video signal sources.
Signal Relay Bypass Function
It features an input and output signal relay bypass function.
Video Loop-Through
Internal settings can be used to set loop-through for video input.
Gain
Gain can be adjusted from the front of the card.
More Information
ManufacturerFor.A
Mfr Part NoUFM-18VDA
ConditionNew
Specification
Input (1) composite: 1.0Vp-p, 75 Ohms or high-impedance loop-through, BNC
Output (8) composite: 1.0Vp-p +/-0.3dB, 75 Ohms, BNC (4 at input loop-through)
Output Gain +/-3dB for input signal
Power Output (DC) +/-10mV (at clamp), +/-50mV for input signal (at DC couple), OFF clamp, AC couple output
Frequency 100kHz to 12MHz +/-0.3dB (100Hz base)
K Factor Less than 1%
Differential Gain Less than 0.5%
Differential Phase 0.5ÔøΩ (NTSC/PAL)
Signal-to-Noise Ratio Better than 60dB(p-p/rms)
Requirements (1) open slot
PowerPower: +12VDC - +24VDC +/-10%
Consumption: approximately 2.9W
Draw:+12VDC: 0.26A, +24VDC: 0.13A
Dimensions (HxWxD)Rear board: 4.17 x 11.92" (106 x 303mm), (WxD)
Front board: 0.78 x 4.27 x 2.6" (20 x 108.5 x 66.1mm)
Weight 1.1 lbs (0.5kg)
Write Your Own Review
You're reviewing:For.A UFM-18VDA 1x8 Analog Video Distribution Amplifier
Your Rating