Holosonics directional speakers are back in stock

Crown Audio XTi 4002 650W Stereo Power Amplifier, 20Hz to 20kHz Frequency Response, 1.4Vrms Input Sensitivity

Special Order Please call for availability. Item might be directly shipped to you from manufacturer
SKU
CRO_XTI4002
Special Price $1,499.00 Regular Price $1,799.00

About Crown Audio XTI4002

The Crown Audio XTi 4002 Power Amplifier delivers up to 650W per channel at 8 ohms and is an ideal solution for sound reinforcement, nightclub installation, bands, theaters, DJ applications and much more. The XTi 4002 offers highly accurate sound reproduction with very low distortion, perfect for music or voice playback. It has a switch-mode universal power supply, so it can be used anywhere. It handles a wide range of speaker impedances and outputs for a high degree of system compatibility.

An array of serious control features are implemented and easily accessed via the included HiQnet Band Manager & System Architect software packages. Crown's Peak Plus Limiters provide the ultimate in system performance and protection. There are 3 user-defined fan modes, adjustable EQ, adjustable crossover filters and much more.

Crown Audio XTI4002 Features

  • Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet Band Manager and System Architect control software
  • Increased number of presets to a total of 30; 29 of which are user definable
More Information
Mfr Part NoNXTI4002-U-US
Upc Number871015005393
Stock StatusSpecial Order
ConditionNew
Specification
Output Power
1600W @ 2 Ohms Stereo (per Channel)
1200W @ 4 Ohms Stereo (per Channel)
650W @ 8 Ohms Stereo (per Channel)
3200W @ 4 Ohms Bridged-Mono
2400W @ 8 Ohms Bridged-Mono
Sensitivity
1.4 Vrms
Frequency Response
(at 1 watt, 20 Hz - 20 kHz) +0 dB, -1 dB
Signal-to-Noise Ratio
100 dB (A weighted)
Total Harmonic Distortion (THD)
< 0.5%
Damping Factor 20 Hz to 1 kHz
> 500
Crosstalk (below rated power)
20 kHz - 1 kHz: > 70 db
Input Impedance (nominal)
20k ohms balanced, 10k ohms unbalanced
Maximum Input Signal
+22 dBu typical
AC Line Voltage/Frequency Configurations
100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
AC Line Current
10.5A; no more than 38W at idle
Operating Temperature
0 Deg.C to 40 Deg.C at 95% relative humidity (non-condensing)
Level
Two front-panel rotary level controls, one for each channel
Power Switch
On/Off switch applies AC power to the amplifier
Sel/Prev/Next Buttons
Three buttons near the LCD screen that are used to access menu items and front panel lockout
LCD Screen
Backlit liquid crystal display that shows preset and processing status
Signal Indicator
Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
-10 Indicator
Green LED flashes when output signal exceeds -10 dB below clip.
-20 Indicator
Green LED flashes when output signal level exceeds -20 dB below clip.
Ready Indicator
Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
Clip Indicator
Red LED, one per channel, turns on at the threshold of audible distortion
Temp Indicator
Red LED, one per channel, illuminates under excessive temperature conditions
Power Indicator
Blue LED illuminates when the amplifier has been turned on and has power
Input Connectors
XLR, one per channel
Link/Out Connector
Loop-thru signal from input connector for linking another amplifier, one per channel.
Output Connectors
Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
HiQnet USB Connector
Type B, connects to HiQnet network.
Chassis
Steel
Front Panel
Cast-aluminum
Cooling
Proportional speed fan with front-to-rear airflow.
Dimensions (W x H x D)
19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm)
Weight
18.5 lbs (8.4kg)
0
Rating:
0% of 100
Write Your Own Review
You're reviewing:Crown Audio XTi 4002 650W Stereo Power Amplifier, 20Hz to 20kHz Frequency Response, 1.4Vrms Input Sensitivity
Your Rating

Shipping Policy

We ship via UPS, FedEx, or US Postal Service. All deliveries are also subject to the carrier's terms & conditions. We don’t ship to PO Box, HI, PR, AK, APO, FPO. Products will be shipped from our warehouses or our suppliers’ warehouses based on the availability. Read more

Return Policy

Ateksis USA Corp, (www.eproav.com), is dedicated to bring you the best in professional audio and video solutions. If you are not completely satisfied with your purchase for any reason, you may return it within 15 days of the purchase date, subject to conditions and exclusions below. Read more