Clear-Com PS-702 2-Channel 1-Amp Universal Power Supply

PS-702

Technical Specifications

Program Line Input
Maximum Level before Clipping: >= 20dBu
Input Impedance: >= 5K?

Frequency Response
Program Input - Partyline: 200 - 20KHz ÔøΩ 3dB

Max Distortion
Program Input - Partyline: <= 0.2%

Noise
Program Mic Input - Partyline:< -70dBu

Max Gain
Program Input - Partyline: >= -16dB

Min Gain
Program Input - Partyline: <= -20dB

Mains Power
Input Voltage Range: 100 - 240 VAC
Input Frequency Range: 50 - 60 Hz
Input Power: <= 60 VAC
Output Voltage: 30 VDC ÔøΩ 0.5V
Output Current per Channel (Continuous): 1.2 A
Output Current per Channel (Peak): 2 A (Do not exceed the 1.2A rating for more than 2 seconds per 1 minute period)
Short Circuit Recovery Time (1st short): <= 0.5 sec
Short Circuit Recovery Time: >= 20 shorts in 20sec <= 20 sec

Station Capacity
Up to 40 RS-601 beltpacks or 10 speaker stations or 12 headset stations distributed over both channels

Rear Panel Connectors
Intercom: (6) XLR-3M (3 per channel)
Program: (1) XLR-3F
AC Power: IEC 320 connector

Rear Panel Controls
(2) Termination On-Off switches
(1) Volume control

Front Panel Connectors
Intercom (1) XLR-3M

Front Panel Controls & Indicators
(1) Intercom channel switch
(1) A+B link switch
(2) Program switch
(2) Send level controls
(1) Test tone switch
(2) Overload LEDs
(1) Link indicator LED
(1) Power indicator LED
(1) Power switch

Environmental
32? - 122?F (0? - 50?C)

Dimensions
19 in. W x 1.75 in. H x 7.5 in. D
(483 mm x 44 mm x 190 mm)

Weight
6.16 lbs. (2.80 kg)

Product Spares List

Product Spare Part	Spare Part Description
810493Z	PS-702 MANUAL