AASTRA BS330 NTM/KRCNB30103/1 TRANSCEIVER

SKU
AAS_BS330
Our Price $265.13 Regular Price $662.81
No Longer Available

$0.00 Tax Outside NY and NJ 

This is a clearance item. Ships in 5-7 business day

• NTM/KRCNB 301 03/1 for use with DECT 1880-1900 MHz GAP/CAP systems

• NTM/KRCNB 301 02/1 DECT 1900- 1920 MHz GAP/CAP for use with systems

• NTM/KRCNB 301 04/1 for use with DECT 1910-1930 MHz GAP/CAP systems

• DECT radio interface

• Can handle 8 simultaneous calls

• Connection to PBX or radio exchangevia 2 twisted pairs

• Powering via data lines and optionally extra lines

• Low power consumption

• Distances between the telephone system and base stations of up to1.9 km

• Easy software upgrade

• Internal antennas

• External LED status indication

• Compact lightweight design

• Easy installation in minimal space to flat or round surfaces

Click Here to request quote for bulk quantity

+1 (888) 606-6268

AASTRA BS330 

Antennas

The BS330 has two internal antennas. At any time during the transmission or reception cycle only one antenna is active. However, fading of the radio signal is corrected by switching to the other antenna for transmission and reception. This switching, also called spatial and polarisation diversity can be done per time slot and results in a more stable radio performance and hence better speech quality

Interface

The connection between the base station and the radio exchange is established via two proprietary U-interfaces using 2B+D. Each U-interface uses one twisted pair. The two bidirectional U-interfaces provide a data rate of 128 kbits/s for speech each, which is sufficient for 8 simultaneous calls.

Connectors

Two RJ45 and one RJ12 modular ‘jack’ type connectors are located on the rear of the base station. The two RJ45 jacks are for data/power connection the RJ12 jack is for connection to PC. The two data/power connectors are interconnected inside the base station.This arrangement allows connection of more than one cable to the base station, for instance one for data and one for powering.

Distances

The maximum length of the cable between the radio exchange and the basestation depends on the supply voltage,the wire thickness of the twisted pair cables and the number of express power pairs used. The length of the cable between the telephone system and base stations can be up to 1.9 km. The radio coverage radius of the base station depends on the propagation characteristics and varies between 20 m and 300 m.

Easysoftware upgrade

The software of this base station resides in programmable non-volatile memory. This memory can be programmed using the Cordless System Manager or Base Station Manager software.

Power

When powering the base station from the PBX or radio exchange, the voltage offered to the base station may vary, depending on the distance between base stations and radio exchange (i.e. power supply). The base station requires a minimum voltage of 21 Vdc. The maximum input voltage that can be offered to the base station is 56 Vdc. The polarity of the supply voltage is not important.

Mounting

The base station has facility for mounting on a wall, ceiling or pole, using the same mounting bracket. The bracket can be secured to the supporting surface first and then the base station can be fixed on the bracket, making base station fitting and exchange relatively simple.

• NTM/KRCNB 301 03/1 for use with DECT 1880-1900 MHz GAP/CAP systems

• NTM/KRCNB 301 02/1 DECT 1900- 1920 MHz GAP/CAP for use with systems

• NTM/KRCNB 301 04/1 for use with DECT 1910-1930 MHz GAP/CAP systems

• DECT radio interface

• Can handle 8 simultaneous calls

• Connection to PBX or radio exchangevia 2 twisted pairs

• Powering via data lines and optionally extra lines

• Low power consumption

• Distances between the telephone system and base stations of up to1.9 km

• Easy software upgrade

• Internal antennas

• External LED status indication

• Compact lightweight design

• Easy installation in minimal space to flat or round surfaces

More Information
Stock Status No Longer Available
Manufacturer Aastra
Mfr Part No BS330
Specification
Physical
Dimensions: 200 (w) x 165 (d) x 56 (h) mm
Weight: 470 grams
Material: ABS moulded plastic
Colour: light grey
Environmental
Operating temperature -10 to +55 °C
Storage temperature  -40 to +70 °C
Relative operating humidity 15 to 90%, non condensing
Relative storage humidity 5 to 95%, non condensing
Functional
  Operating voltage 21 to 56 Vdc
Power consumption typical 3 W maximum 5 W
RF output power (e.r.p.) between 19 dBm and 24 dBm
Receiver sensitivity at least -86 dBm at B.E.R. = 10-3
Compliance to European regulations and standards
CE regulation 1999/5/EC, Radio &Telecommunications Terminal Directive R&TTE 73/23/EEC, Low Voltage Directive 89/336/EEC, Electromagnetic Compatibility Directive (EMC)
DECT standard TBR6:1999
Safety standard EN 60 950:1992;A1, A2, A3, A4 + A11, IEC 60 950: 1991;A1 - A4
EMC standard ETS 300 329 06:1997 0344
Write Your Own Review
You're reviewing:AASTRA BS330 NTM/KRCNB30103/1 TRANSCEIVER
Your Rating