Arrakis Systems DARC Virtual Broadcast Console Software (PC not included)

SKU
ARK_DARC
$2,000.00
Special Order

$0.00 Tax Outside NY and NJ 

Click Here to request quote for bulk quantity

+1 (888) 606-6268

AoIP for Everyone.

Audio over IP does not need to be complicated or expensive. With the DARC Virtual Console, you can control any Dante network audio source. Mix, adjust levels, everything you need for an On-Air or production room console.

A Virtual Console designed for you.

Meet DARC, an intuitive, powerful Dante Virtual Console. It is a powerful mixing console that runs virtualized in a PC environment.

Designed to be easy to setup, and use, yet flexible and powerful for your needs today, and tomorrow.

Virtual Broadcast Console.

4, 8, 12 or 16 input channels.

3 Stereo output buses.

Simple & Configurable

The DARC Virtual Console can be ran as a stand alone unit, or in conjunction with an AoIP network with multiple studios. It will control any Dante enabled audio device on your LAN, whether it is a source connected to our Simple IP units, or any Dante device such as the Dante AVIO

Standalone Unit

As a standalone unit, you don't need a large AoIP network to utilize this brilliant board. Simply connect all your audio sources into one of our Simple IP boxes (or any Dante enabled device), then connect the Dante Virtual software onto the same network. Utilizing the Dante Controller software, you choose which sources to control, and away you go.

AoIP Configuration

Since DARC controls any Dante audio source, you can configure DARC to control any audio source on your LAN. This allows you to make your setup as large and complex as your studios require. Which also allows you to expand your operations in the future.

3 Output Buses

▪ PGM, AUD, UTL. DARC can assign output control to any output on your Dante network. This may be one of our Simple IP units, which has 4 stereo outputs per box.

▪ Monitor, Cue & Headphone outputs. Utilize the Cue function built in to the DARC software to play audio off-air through your monitor, cue or headphones. Monitor, Cue and Headphones all connect to your Simple IP unit.

▪ Mic Monitor Mute. Mic channels will automatically mute the monitor output and play audio through the headphones when activated. Talk back audio plays through headphones as well.

More Information
Stock Status Special Order
Mfr Part No DARC
Refundable / Cancelable? Yes
Specification

4, 8, 12, 16 Channels. Digital Console. Flexible and powerful.

Configurable Channels - with configurable channels, you can can choose between controlling 4, 8, 12 or 16 Dante network audio channels.

Mic Channels - choose between 1 to 16 mic channels.

Digital Meters - stylish and easy to use digital meters for Program, Audition & Utility buses.

No More RF - Simple IP uses balanced inputs & outputs for use in high RF environments.

 

Remote Control from Anywhere. Connect and Control.

Windows Based  - Any remote access software is capable of controlling your DARC unit. This means that you can turn channels on/off, control volume, etc, from anywhere you have an internet connection. Whether from your phone, your home PC, you are in control.

 

Dante & AES67. AoIP done right.

Dante  - DARC Virtual Software utilizes the Dante audio networking protocol. This protocol has hundreds of manufacturers, and is world recognized.

AES67 - Dante utilizes AES67, which allows you to connect any AES67 enabled device.

Dante Virtual Soundcard - The Dante Virtual Sound card is included in the price, and enables you to put ASIO sources from your PC to the Dante network.

Dante Controller - Is a free software from Dante, that allows you to route input and output audio on your Dante local network.

Dante AVIO- The Dante AVIO hardware are extremely affordable input and output adapters. Quickly and easily connect any analog or digital hardware device, and stream the audio to the Dante network.

More details can be found here:  www.audinate.com

 

3 Stereo output buses. Program, Audition & Utility with mono mixdowns.

Active balanced - All outputs & inputs are active balanced on Simple IP hardware.

Stereo or Mono - Both stereo & mono outputs for 3 output buses on Simple IP hardware.

Listen - Monitor, Cue & Headphone output to cue and talk to callers off air.

 

3 types of Inputs. More options, more power.

1 - 16 Mic Channel Your choice, your configuration. Simply connect your mics to the Simple IP inputs. Each Simple IP box allows you to connect up to 4 mic channels. Channels are software assignable.

Stereo Line level Channel - Using Simple IP, the stereo input channels are appropriate for source devices like CD players, MP3 players, network feeds, etc. With balanced inputs, it allows you to safely connect to sources, that are originated in other studios, where the long wiring could introduce hum & noise.

Telephone Channel - Easily connect to an external telephone hybrid using Simple IP. The caller can talk to you through the Cue system while a 'Push to Talk' button in the software enables the first mic to talk off-line to the caller.

 

Phone line system. Connect your phone hybrid to Simple IP for a powerful phone system.

Phone Channel - dedicate a channel to easily connects to an external telephone hybrid.

Talkback Cue System - the caller can talk to you through the Cue system while a Talkback button enables the Control Room mic to talk off-line to the caller.

 

Analog RJ45 or Digital XLR. Flexible for you.

Simple IP 8A - Has RJ45 analog inputs and outputs.

Simple IP 8D - Has XLR, AES3 digital inputs and outputs.

 

Windows & Touchscreen Compatible. The best technology.

Windows - DARC Virtual Console works with the Windows OS. See the support page to view the required specs.

Touchscreen - Use any Windows OS based touchcreen with the DARC Virtual Console. DARC is specifically designed to be easy to use with touchscreens.

 

AND MUCH MUCH MORE

Check out our brochures for more information.

Write Your Own Review
You're reviewing:Arrakis Systems DARC Virtual Broadcast Console Software (PC not included)
Your Rating